How To Delete Unwanted Layers In Autocad

AutoCad 3D :: Won't Delete Layers In Drawing In Layers Properties Manager

You can do with LT: the reason the layers do not purge is that they are referenced by blocks/attributes on other layers. If you have access to Full AutoCAD, and Express Tools, LAYMRG or LAYDEL commands do a good job of eliminating the unwanted layers (by merging. For instance: you have a block that you want to keep in your drawing that you have put on layer 7. The block was created on layer 0 but has some elements that are on layer 1. Even if there is absolutely nothing showing on layer 1, the block is still using it and AutoCAD will not let you purge that layer. The references of the layers are also removed so that it appears to be empty and can easily be created. If the layer is empty then the PURGE will not be able to remove the layers from the drawing. The layer can be made frozen on the viewport that is visible to the object and provide the definition of the object too. One of our Tip Patrollers, Mitch Hirschklau, shares a tip on purge-resistant items in AutoCAD. 'On the subject of purging unwanted and seemingly unpurgeable layers (and Dimstyles, linetypes, textstyles, and other items), I have a low-tech trick which might help when all else fails.

There are some layers in my drawing that won't delete in the layers properties manager. I don't know why. It gives me 4 possible reasons:
- It might be layer 0 or a Defpoint (whatever that is).
- It is the current layer
- It is an Xref dependent layer
- It is a layer containing objects
But none of these, to my knowledge, apply. There could be things on the layer that I'm just not seeing, but I've looked thoroughly. I even zoomed out to the extents, highlighted the whole area, and clicked the erase tool, but it still won't go away. I got the file from another computer, so it might be an Xref dependent layer and the Xref'ed files just didn't come with it. How would I be able to tell - and how could I remove the Xref dependency?
Other than that, is there any other reason a layer won't delete? Can I force it to delete?

AutoCAD LT :: How To Delete Layers

How do I delete a layer? I am unable to even though the layer is not current, is not layer '0' or 'Defpoints',is not a Xref dependent layer, nor does the layer contain any objects.

AutoCad 2D :: How To Delete Unwanted Layers

I have imported a dxf file from our Trimble handheld unit. The dxf has layers built into it that come straight from the trimble software. (ei, FENCE, TANK, WELL HEAD, FIELDLINE) I have custom built layers and linetypes for my .dwt file in Cad so I dont need the layers that followed the dxf file.
For some reason I am unable to delete those layers, I get a warning box saying:
The following layers cannot be deleted:
. layers 0 and Defpoints
. The current Layer.
. Layers containing objects.
. Xref-dependant layers
I am not on the current layer, I am pretty positive there is no objects on the layers I want to delete ( i have deleted my gps points and blocks that were imported)
I am not using any xref dwg's

AutoCAD 2013 :: Delete Layers After Translating?

I am using layer translate to convert from one set of standards to another. I have created a translation file with all the desired settings and everything works fine, except the old layers remain in the drawing after translating. Is there a way to delete all of the old (unused) layers after translation?

AutoCAD Civil 3D :: Delete All Base Layers

Is there a way to delete all the autocad base layers that come in with my template?

AutoCAD Visual LISP / AutoLISP :: Delete All Objects In All Layers Except One Layer?

lisp program to delete all objects in a drawing based on Layer excluding one layer objects.
in AutoCAD.
Example : I may have 10 layers in a drawings like 1 to 10. I need to delete all objects on 2 to 10 layers.

3ds Max :: Layers Take Too Long To Delete?

When i import a dwf it auto generates a layer for each piece of geometry in the file. There is no way to merge the layers during import that i know of.
So i just select every object and place them into the default layer0.. takes 20 seconds.
Now i want to cleanup all the unused empty layers so i can make new layers later on. When i select the first layer.. then SHIFT click the last layer 3dsmax lags then freezes.
When i do this same thing in 2010 the layers select properly.. but once i hit delete 3dsmax freezes again! Now i know 3dsmax. even if it freezes as long as its using any form of cpu its just processing. So i waited OVER-NIGHT just to delete a bunch of layers, and it worked! Deleting the layers one by one take 30seconds each.. not going threw a thousand layers like that!
My questions: Why does deleting or even selecting a bunch of layers take a very very long time? Or even deleting one layer take a long time when theres alot of layers? Anyway to make this faster?

CorelDRAW X4 :: Delete Multiple Layers?

Am I able to select multiple layers at the same time and delete them at once?

Maya :: Cannot Delete Render Layers

I created some render layers by copying the master layer and some of them seem to be connected to the master layer in some way and I cannot delete them!
When I select the render layer they are grey and the master layer is also selected and is blue. I cannot delete the copied layer even if I empty it.
I have created other layers the exact same way but when I select them they are not attached to the master layer and are blue when I select them and I can delete them.
What do I have to do to delete the layers that seem to be connected to the master layer? This is really annoying! I try to do one thing and end up spending the entire day trying to delete rogue render layers! The only work around I found is to select everything in the scene and export it and then import it into a new scene.

GIMP :: How To Delete All Invisible Layers

I can't find a way in Gimp 2.4 to delete all invisible layers, is there one?
When working with a slightly complex file I use to have multiple layers which I show, hide and duplicate as needed. After a while my layers dialog gets cluttered and I need to delete layers I don't need anymore, most of these layers are invisible and going one by one to delete takes much time, an option to remove all invisible layers would be great.
There's an option to delete invisible layers on 'Image > Merge Visible Layers' but this, as the name says, merges all other layers.

Paint.NET :: Layers / Delete All Invisible Before Saving

To reduce file size when working with 100+ layers, can I delete multiple invisible layers before saving?
If not, is there a plug-in for this procedure? For a multi-page tutorial with over 100 layers, pdn is slow when opening or saving the file. I would like to save each page of the tutorial as a separate .pdn file for faster loading/editing/saving. Unfortunately, to save each individual page, I must delete many layers one-at-a-time which is very time consuming.
I need to delete all invisible layers before saving, to save each page separately and keep the original multi-page intact for backup until all individual pages are saved.
[URL]
How many layers can PDN handle?

Illustrator :: Delete Multiple Layers By Selecting Multiple Object?

I'm going to connect my AI file to After effect. So I had to create lots of layers in order to edit them seperatly in After effects. But it seems like my amount of layers are too large because AE always crashes (not responding -> Force quit)
So I wanna break some stuff down in multiple AI files, but I don't wanna go and select every layer and delete it. That would take too much time. Is there a way to select the multiple objects in Illustrator and delete that but also its layer its in?

Photoshop Elements :: 12 - Delete Many Chosen Photos With One Hit On Delete?

Let's say I have downloaded 500 shots to PSE 12. I would like to go through them quickly and eliminate the ones I definitely do not want.How can I quickly tag them or whatever and then with one touch on the delete button delete them all at once?

Lightroom :: Delete File From LR Using Delete From Disk Option?

When i try to delete a file from LR using the delete from disk option the file does not so up in my trash. I have deleted 200 bad files and the never showed up in the trash. I have been trying to clear up some disk space but the available disk still shows the same so I know they haven't been deleted. Am using Lion on a MacBook Pro 15 and am fully updated. Am I doing something wrong?

Lightroom :: 4.3 - How To Delete Pictures Using Contextual Menu Or Delete Key

I have LR 4.3, Camera Raw 7.3
Until yesterday I was able to delete pictures, using the contextual menu or the delete key. I got the message asking me if I wanted to delete them from disk or from the catalog.
But now, that popup message doesn't appear. The picture is not removed, just nothing happens.
I checked the logs and this is the error message:
performCommandDesc could not perform command ag.library.expandAllStacks (Command was disabled.).
I uninstalled LR moving it to the trash. Then I deleted the com.adobe.Lightroom4.plist and I also removed the folder ~/Library/Application Support/Adobe/Lightroom.
I rebbooted the machine and installed it again. But the issue is still there, with the same error message.
I verified the disk and checked file permissions.
I also tried to use another catalog from a backup.
Nothing, same error.
One anusual thing that I did before the error was to install the 'HDRsoft Merge to 32-bit HDR Plug-in for Lightroom - Version 1.0'
I removed it but the error was still there. After the re-install I didnd't install that plug-in again so if it was the problem, it shouldn't be after the clean installation that I did again.
Machine Specs:
Man mini server mid 2011
2GHz Intel core i7
Ram: 8G
Graphics: Intel HD Graphics 3000 512MB
OSX: 10.8.2 (12C60)

Photoshop :: Can't Delete Selected Layer Using Delete Key CS6

How To Delete Unwanted Layers In Autocad

Why can you no longer delete layers with the delete key?

AutoCAD Civil 3D :: Lisp Routine For Thawing Layers Then Freezing Specific Layers

I would like to know how to write a routine to thaw all layers in current drawing and multiple xrefs; then freeze all, then thaw only certain layers globally for a drawing that is open. Such as a dimension plan will thaw only *-BLDG, *-DIMS, *-RD-*, *BNDRY.
I would like to create one that will fit every project which has a different xref name.

AutoCAD 2010 :: Macro To Create Layers And Place Text In The Layers?

We use AutoCad to name our dxf files for our Burn Table and whenever we get a new part it is a repetitive task to input layers and common text. So what I am curious is can AutoCAD input the layers and text automatically using a Macro?
I want the Macro to put in 6 layers and choose the layer color and title then input text boxes with word in 3 different layers. There will be about a total of 10 different text boxes with text already put in the boxes by the Macro.

Illustrator :: Can't Delete Anchor Points With Delete Anchor Point Tool

I have a shape in illustrator CS6 that I'm trying to edit. When I try to click on a point with the Delete Anchor Point Tool nothing happens however I am able to select the point using the Direct Selection Tool and then remove it using the 'Remove selected anchor points' option in the Control palette. Same issue with trying to use the Convert Anchor Point Tool.

AutoCAD 2010 :: Bind Xref Layers To Master Layers

I am currently updating and coming up with a better system for are plant layout file for AutoCAD. When this project is complete, it will be set up so if someone needs to make a change they can just make a copy of the X-Ref file for the area they will be updating and hand it back in when there done. I will review the updated X-Ref then switch out the old X-Ref file for the updated one.
Problem: the problem I am having is when I am in the master drawing that contains all the X-Ref files, the layers list becomes enormous. There are about 30 to 40 different X-Ref files with 15 layers each. Those 15 layers contain the exact same information but you have to edit them individually.
Question: Is there a way to make the 15 layers in the master effect the corresponding layer in all the X-ref files? For instance, you hide the 'Machines' layer in the master and it hides the 'Machines' layer in all the X-ref.
Side Note: If you were going to make the suggestion 'use Xbind' I've tried it and it doesn't work well because 'Xbind' creates a new layer you have to assign to things instead of making the layers relate to one another.

AutoCAD .NET :: Simple Program To Gather Layers And Change To Different Layers

I am just starting to learn C# and .NET and I am trying to write a simple program to gather all the layers from a drawing in a directory, save them to a list, and use that list to change those layers to the appropriate layers. The way I want it to iterate is open the first drawing, gather the layers, ask the user which layer they want to change the original layer to, and when they select the new layer, it associates that old layer with the new layer so that in the future it won't prompt the user, it will just change it to that layer. Then it changes the layers and goes to the next drawing.
I wrote something very simple in LISP, but I need to make it more advanced and try to add in more features. Specifically I would like to be able to do everything in the background, without actually opening the drawings so I can avoid any user prompts or dialogue boxes.
I am at a complete loss at where to start though. There are so many members in the different namespaces for Autocad. Right now I am looking through acdbmgd.dll and acmgd.dll to try and find something useful, but I have no idea where to even start.
My guess would be to first define a method that gathers the layers from the drawing and saves them to an array. For example i would have multiple arrays for the different layers to which I want to convert the old layers, string [] 0layer, string [] walllayer that contains all of the layers to be changed to layer 0 and wall layer. Then I would compare the layers in the drawing to those arrays, if they are not present in any of the arrays, the program would prompt the user and ask which layers they want to change the existing layer to and add it to the appropriate drawing. Then all of the layers in those arrays would be changed to the different new layers.
At the very least, I am going to start making the different arrays to be filled. That much I can do. I'm just having trouble actually getting the data from the drawings.

AutoCad :: Select Different Layers - Layers Name In Toolbar Does Not Change

when i select diffrent layers,the layer's name in toolbar does not change, i can not change the layer, color,and other settings.my autocad version is 2006 and 2007.

Photoshop :: Deleting Duplicate Layers Linked To Others Make Remaining Layers Invisible?

I'm using CS6 and noticed that whenever I delete a layer that was a dupe of another layer with links (although not linked specifically to the deleted layer), the undeleted original layers become invisible on the canvas even though they are still visible in the layers pallette. I've been able to recreate this several times. Nothing I do will make the layers visible -I've tried moving them all to the top of the layers palette, making sure their opacity is 100%, making sure there are no layer effects, etc.

Photoshop :: Copy Linked Layers In Layers Palette Without Maintaining Links To Originals

I often will copy a layer in the layers palette via option drag. If the original layer is linked to another, the new layer is also linked to the orginal layer I copied as well as any other layers that original was linked to.
Is there anyway to option drag to copy a layer in the layers palette without the new layer being linked?

Photoshop Elements :: All Image Layers Have Randomly Converted To Smart Object Layers?

All of my image layers have randomly converted to smart object layers and I can no longer resize them in the ps document. Why would it do this and how can I undo it?

Photoshop :: Apply Adjustment Layers To Multiple Layers That Have Different Blending Modes?

How to Apply adjustment layers to multiple layers that have different blending modes and keep the colors the same as the adjustment done?
I work in Animation painting Backgrounds. My files are sometimes upwards to 200+ layers.I will use adjustment layers to quickly balance colours and constrast on top of those many many layers.
The only way that I know of how to apply adjustment layers it to every single layer ( by applying I mean I need to get rid of the adjustment layers because we cant use them in production but i need the new colours be applied to all layers underneath ) in a psd is to manually do it By duplicating the adjusment layer 200+ times and then merging each layer to one of those adjustment layers so that that layer can take the adjustment layers effect permanently.
The issue is that Within Those 200 layers I have some layers set to Multiply or OVERLAY. IT obviously wont apply the adjustment layer properly to those layers because those layer blend mode affect the layers under them. The colour wont be the same anymore in the spots that had the multiply blended mode.
[URL]
I have 2 adjustment layers up top. I need to get rid of them by applying them to each layer! I cannot merge any of the layers. We need all those layers for production.I can apply the adjustment layers manually and this works GREAT for all Layers set to normal. THey take on the colour change just FINE.
However, The issue is that layer 6 and layer 4 are both set to mutiply and this screws up the colour once i apply the adjustment layers to each layer manually..
How can i apply my adjustment layers to a file like this with some layers being set to multiply while keeping the layers exactly the same configuration and The new colour taking effect exactly how i looks before i apply the adjustment layers? Now the simple solution is to merge the multiply layers to the layer that it affects HOWEVER I NEED those multiply layers to be separate!

lisp program to delete all objects in a drawing based on Layer excluding one layer objects.
in AutoCAD.
Example : I may have 10 layers in a drawings like 1 to 10. I need to delete all objects on 2 to 10 layers.

3ds Max :: Layers Take Too Long To Delete?

When i import a dwf it auto generates a layer for each piece of geometry in the file. There is no way to merge the layers during import that i know of.
So i just select every object and place them into the default layer0.. takes 20 seconds.
Now i want to cleanup all the unused empty layers so i can make new layers later on. When i select the first layer.. then SHIFT click the last layer 3dsmax lags then freezes.
When i do this same thing in 2010 the layers select properly.. but once i hit delete 3dsmax freezes again! Now i know 3dsmax. even if it freezes as long as its using any form of cpu its just processing. So i waited OVER-NIGHT just to delete a bunch of layers, and it worked! Deleting the layers one by one take 30seconds each.. not going threw a thousand layers like that!
My questions: Why does deleting or even selecting a bunch of layers take a very very long time? Or even deleting one layer take a long time when theres alot of layers? Anyway to make this faster?

CorelDRAW X4 :: Delete Multiple Layers?

Am I able to select multiple layers at the same time and delete them at once?

Maya :: Cannot Delete Render Layers

I created some render layers by copying the master layer and some of them seem to be connected to the master layer in some way and I cannot delete them!
When I select the render layer they are grey and the master layer is also selected and is blue. I cannot delete the copied layer even if I empty it.
I have created other layers the exact same way but when I select them they are not attached to the master layer and are blue when I select them and I can delete them.
What do I have to do to delete the layers that seem to be connected to the master layer? This is really annoying! I try to do one thing and end up spending the entire day trying to delete rogue render layers! The only work around I found is to select everything in the scene and export it and then import it into a new scene.

GIMP :: How To Delete All Invisible Layers

I can't find a way in Gimp 2.4 to delete all invisible layers, is there one?
When working with a slightly complex file I use to have multiple layers which I show, hide and duplicate as needed. After a while my layers dialog gets cluttered and I need to delete layers I don't need anymore, most of these layers are invisible and going one by one to delete takes much time, an option to remove all invisible layers would be great.
There's an option to delete invisible layers on 'Image > Merge Visible Layers' but this, as the name says, merges all other layers.

Paint.NET :: Layers / Delete All Invisible Before Saving

To reduce file size when working with 100+ layers, can I delete multiple invisible layers before saving?
If not, is there a plug-in for this procedure? For a multi-page tutorial with over 100 layers, pdn is slow when opening or saving the file. I would like to save each page of the tutorial as a separate .pdn file for faster loading/editing/saving. Unfortunately, to save each individual page, I must delete many layers one-at-a-time which is very time consuming.
I need to delete all invisible layers before saving, to save each page separately and keep the original multi-page intact for backup until all individual pages are saved.
[URL]
How many layers can PDN handle?

Illustrator :: Delete Multiple Layers By Selecting Multiple Object?

I'm going to connect my AI file to After effect. So I had to create lots of layers in order to edit them seperatly in After effects. But it seems like my amount of layers are too large because AE always crashes (not responding -> Force quit)
So I wanna break some stuff down in multiple AI files, but I don't wanna go and select every layer and delete it. That would take too much time. Is there a way to select the multiple objects in Illustrator and delete that but also its layer its in?

Photoshop Elements :: 12 - Delete Many Chosen Photos With One Hit On Delete?

Let's say I have downloaded 500 shots to PSE 12. I would like to go through them quickly and eliminate the ones I definitely do not want.How can I quickly tag them or whatever and then with one touch on the delete button delete them all at once?

Lightroom :: Delete File From LR Using Delete From Disk Option?

When i try to delete a file from LR using the delete from disk option the file does not so up in my trash. I have deleted 200 bad files and the never showed up in the trash. I have been trying to clear up some disk space but the available disk still shows the same so I know they haven't been deleted. Am using Lion on a MacBook Pro 15 and am fully updated. Am I doing something wrong?

Lightroom :: 4.3 - How To Delete Pictures Using Contextual Menu Or Delete Key

I have LR 4.3, Camera Raw 7.3
Until yesterday I was able to delete pictures, using the contextual menu or the delete key. I got the message asking me if I wanted to delete them from disk or from the catalog.
But now, that popup message doesn't appear. The picture is not removed, just nothing happens.
I checked the logs and this is the error message:
performCommandDesc could not perform command ag.library.expandAllStacks (Command was disabled.).
I uninstalled LR moving it to the trash. Then I deleted the com.adobe.Lightroom4.plist and I also removed the folder ~/Library/Application Support/Adobe/Lightroom.
I rebbooted the machine and installed it again. But the issue is still there, with the same error message.
I verified the disk and checked file permissions.
I also tried to use another catalog from a backup.
Nothing, same error.
One anusual thing that I did before the error was to install the 'HDRsoft Merge to 32-bit HDR Plug-in for Lightroom - Version 1.0'
I removed it but the error was still there. After the re-install I didnd't install that plug-in again so if it was the problem, it shouldn't be after the clean installation that I did again.
Machine Specs:
Man mini server mid 2011
2GHz Intel core i7
Ram: 8G
Graphics: Intel HD Graphics 3000 512MB
OSX: 10.8.2 (12C60)

Photoshop :: Can't Delete Selected Layer Using Delete Key CS6

How To Delete Unwanted Layers In Autocad

Why can you no longer delete layers with the delete key?

AutoCAD Civil 3D :: Lisp Routine For Thawing Layers Then Freezing Specific Layers

I would like to know how to write a routine to thaw all layers in current drawing and multiple xrefs; then freeze all, then thaw only certain layers globally for a drawing that is open. Such as a dimension plan will thaw only *-BLDG, *-DIMS, *-RD-*, *BNDRY.
I would like to create one that will fit every project which has a different xref name.

AutoCAD 2010 :: Macro To Create Layers And Place Text In The Layers?

We use AutoCad to name our dxf files for our Burn Table and whenever we get a new part it is a repetitive task to input layers and common text. So what I am curious is can AutoCAD input the layers and text automatically using a Macro?
I want the Macro to put in 6 layers and choose the layer color and title then input text boxes with word in 3 different layers. There will be about a total of 10 different text boxes with text already put in the boxes by the Macro.

Illustrator :: Can't Delete Anchor Points With Delete Anchor Point Tool

I have a shape in illustrator CS6 that I'm trying to edit. When I try to click on a point with the Delete Anchor Point Tool nothing happens however I am able to select the point using the Direct Selection Tool and then remove it using the 'Remove selected anchor points' option in the Control palette. Same issue with trying to use the Convert Anchor Point Tool.

AutoCAD 2010 :: Bind Xref Layers To Master Layers

I am currently updating and coming up with a better system for are plant layout file for AutoCAD. When this project is complete, it will be set up so if someone needs to make a change they can just make a copy of the X-Ref file for the area they will be updating and hand it back in when there done. I will review the updated X-Ref then switch out the old X-Ref file for the updated one.
Problem: the problem I am having is when I am in the master drawing that contains all the X-Ref files, the layers list becomes enormous. There are about 30 to 40 different X-Ref files with 15 layers each. Those 15 layers contain the exact same information but you have to edit them individually.
Question: Is there a way to make the 15 layers in the master effect the corresponding layer in all the X-ref files? For instance, you hide the 'Machines' layer in the master and it hides the 'Machines' layer in all the X-ref.
Side Note: If you were going to make the suggestion 'use Xbind' I've tried it and it doesn't work well because 'Xbind' creates a new layer you have to assign to things instead of making the layers relate to one another.

AutoCAD .NET :: Simple Program To Gather Layers And Change To Different Layers

I am just starting to learn C# and .NET and I am trying to write a simple program to gather all the layers from a drawing in a directory, save them to a list, and use that list to change those layers to the appropriate layers. The way I want it to iterate is open the first drawing, gather the layers, ask the user which layer they want to change the original layer to, and when they select the new layer, it associates that old layer with the new layer so that in the future it won't prompt the user, it will just change it to that layer. Then it changes the layers and goes to the next drawing.
I wrote something very simple in LISP, but I need to make it more advanced and try to add in more features. Specifically I would like to be able to do everything in the background, without actually opening the drawings so I can avoid any user prompts or dialogue boxes.
I am at a complete loss at where to start though. There are so many members in the different namespaces for Autocad. Right now I am looking through acdbmgd.dll and acmgd.dll to try and find something useful, but I have no idea where to even start.
My guess would be to first define a method that gathers the layers from the drawing and saves them to an array. For example i would have multiple arrays for the different layers to which I want to convert the old layers, string [] 0layer, string [] walllayer that contains all of the layers to be changed to layer 0 and wall layer. Then I would compare the layers in the drawing to those arrays, if they are not present in any of the arrays, the program would prompt the user and ask which layers they want to change the existing layer to and add it to the appropriate drawing. Then all of the layers in those arrays would be changed to the different new layers.
At the very least, I am going to start making the different arrays to be filled. That much I can do. I'm just having trouble actually getting the data from the drawings.

AutoCad :: Select Different Layers - Layers Name In Toolbar Does Not Change

when i select diffrent layers,the layer's name in toolbar does not change, i can not change the layer, color,and other settings.my autocad version is 2006 and 2007.

Photoshop :: Deleting Duplicate Layers Linked To Others Make Remaining Layers Invisible?

I'm using CS6 and noticed that whenever I delete a layer that was a dupe of another layer with links (although not linked specifically to the deleted layer), the undeleted original layers become invisible on the canvas even though they are still visible in the layers pallette. I've been able to recreate this several times. Nothing I do will make the layers visible -I've tried moving them all to the top of the layers palette, making sure their opacity is 100%, making sure there are no layer effects, etc.

Photoshop :: Copy Linked Layers In Layers Palette Without Maintaining Links To Originals

I often will copy a layer in the layers palette via option drag. If the original layer is linked to another, the new layer is also linked to the orginal layer I copied as well as any other layers that original was linked to.
Is there anyway to option drag to copy a layer in the layers palette without the new layer being linked?

Photoshop Elements :: All Image Layers Have Randomly Converted To Smart Object Layers?

All of my image layers have randomly converted to smart object layers and I can no longer resize them in the ps document. Why would it do this and how can I undo it?

Photoshop :: Apply Adjustment Layers To Multiple Layers That Have Different Blending Modes?

How to Apply adjustment layers to multiple layers that have different blending modes and keep the colors the same as the adjustment done?
I work in Animation painting Backgrounds. My files are sometimes upwards to 200+ layers.I will use adjustment layers to quickly balance colours and constrast on top of those many many layers.
The only way that I know of how to apply adjustment layers it to every single layer ( by applying I mean I need to get rid of the adjustment layers because we cant use them in production but i need the new colours be applied to all layers underneath ) in a psd is to manually do it By duplicating the adjusment layer 200+ times and then merging each layer to one of those adjustment layers so that that layer can take the adjustment layers effect permanently.
The issue is that Within Those 200 layers I have some layers set to Multiply or OVERLAY. IT obviously wont apply the adjustment layer properly to those layers because those layer blend mode affect the layers under them. The colour wont be the same anymore in the spots that had the multiply blended mode.
[URL]
I have 2 adjustment layers up top. I need to get rid of them by applying them to each layer! I cannot merge any of the layers. We need all those layers for production.I can apply the adjustment layers manually and this works GREAT for all Layers set to normal. THey take on the colour change just FINE.
However, The issue is that layer 6 and layer 4 are both set to mutiply and this screws up the colour once i apply the adjustment layers to each layer manually..
How can i apply my adjustment layers to a file like this with some layers being set to multiply while keeping the layers exactly the same configuration and The new colour taking effect exactly how i looks before i apply the adjustment layers? Now the simple solution is to merge the multiply layers to the layer that it affects HOWEVER I NEED those multiply layers to be separate!

Photoshop :: Adding Same 3 Adjustment Layers To Many Photos Then Export Layers To File?

Adobe acrobat pro 2015 crack. I want to add the same 3 adjustment layers to about 20 photos and then in scripts, export layers to files, so that each photo includes the adjustments.

Photoshop Elements :: How To Create Layers In Adjustment Layer And Transfer Those Layers

How do I create layers in an adjustment layer and transfer or duplicate those layers in another image ?
I need to transfer the same colour readjustment from one image to several other images .. I have been told to do this in the adjustment layer platform how ever I cannot drag or copy those layers over to the other images I have open and in need of adjustment to the same layers ..
Images shows my layout and what i've done this far

Photoshop :: Increase Font Size In Many Text Layers At A Time By Selecting In Layers Panel

How To Delete Unwanted Layers In Autocad File

I would like to increase the font size in many text layers at a time by selecting them in the layers panel. The font increases, but the text boxes don't expand to fit the increased size text. So I am having to make each box bigger manually. Is there a way to have the boxes expand to fit bigger text automatically through the layers panel?

Photoshop :: Merge Layers :: Results To A Slight Different Color Compare To Its Original Unmerged Layers

merged layer results to a slight different color compare to its original unmerged layers. the result is that the merged layer has more bluish, What's wrong and what's the solution?. Im using CS3.

The following layers can't be deleted:

1. Layer 0 and Layer Defpoints that are default layers.

2. The current active layer. To delete the layer, you have to shift to another layer, or just set another layer as the current active layer.

3. Layers containing any object

• In the first case where there are entity objects on this layer, execute qselect command, select all the objects on the layer, and move them to another layer, or just delete them.
• In the second case where there is no entity object on this layer, or the above action has been taken, but the layer still can't be deleted, the graphics on the layer might probably incorporated into a block, so you have to open the block editor, and move the graphic elements to another layer. The problem is, if there are many blocks, how can we identify the right block and the graphic elements? Solution: hide or freeze all objects in the drawing, and insert all blocks into another layer, decompose (explode or break up) all of them, and use the mouse to frame them up, check the layer information to identify the elements on the layer to be deleted. Then redefine the block, or modify it in the block editor. So it's better to apply Layer 0 when creating a block.

• If there is a block on the layer or if objects (such as blocks) are referencing the layer, when you insert a graphic after a block is created, and then you explode or delete it for some reason, even you delete all the visible graphical elements from this layer, you still can't delete the layer, as there are other hidden elements (such as blocks) on the layer. There are two ways to delete the layers of this kind:

How To Remove Unwanted Layers In Autocad

• Use the PURGE command (shortcut keys 'pu') which can be used to clear out nearly all hidden elements, including dimension style, printing style, multiline style, blocks, layers, text style, linetype and graphics. First use the command to clear out the blocks and hidden elements that are no longer required, and then delete the layer. Now the layer can be directly deleted.
• As for the layers that still couldn't be deleted after the PURGE command is executed, you have to open the additional CAD menu 'Express', and use the 'laymrg' command to combine the layers. The 'laymrg' command can integrate a layer into another layer, making it totally disappear. In this way, the layer is indirectly deleted! This command can be used to delete any layer, no matter whether there is any other graphical element.

Autocad Delete Layers With Objects

4. Xref-dependent layers: use the laydel command to delete these layers